漳州力士樂伺服放大器維修：Description:故障說明：When turning off the drive controller with a absolute encoder (multiturn), the actual feedback position will be stored. When powered up, the absolute position given by the encoder is compared to the stored position. If the deviation is larger than the paramaterized "P-0-0097,AbsoluteEncoderMonitoring Window", the error "F276, Absolute Encoder Error" will appear and be given to the control system.當用絕對編碼器（多匝）關閉驅動控制器時，將存儲實際反饋位置。通電后將編碼器給出的絕對位置與存儲的位置如果偏差大于參數化的“P-00097，AbsoluteEncoderMonitoring Window“，錯誤”F276，Absolute“編碼器錯誤”將出現并提供給控制系統。
Cause:原因：
1. Turning on for the first time (invalid stored position).首次打開（存儲位置無效）。
2. The motor was moved further than allowed by the parameter in the absolute encoder monitoring window, P-0-0097, while it was turned off.當電機關閉時，電機的移動超過絕對編碼器監控窗口P-0-0097中的參數所允許的范圍。
3. Incorrect position initialization位置初始化不正確
Remedy:解決措施：
1. Press S1 to reset the error and set the absolute position.
按S1重置錯誤并設置絕對位置。
2. The motor was moved while turned off and sits outside of its permissible position. Check to see if the displayed position is correct in relation to the machine zero point. Reset subsequent errors.電機在關閉時移動，位于其允許位置之外。檢查顯示的位置相對于機器零點是否正確。重置后續錯誤。
力士樂伺服放大器F276代碼維修點：An accident may occur by accidental shaft movement. Check absolute position informartion. A feedback defect is present if the absolute position information is false. The motorshould be exchanged and sent to the INDRAMAT Customer Service .意外軸移動可能會發生事故。檢查絕對位置信息。如果絕對位置信息為假，則存在反饋缺陷。應更換電機并聯系上海仰光電子客戶咨詢部。
轉載請注明出處：上海仰光電子科技專業伺服驅動器維修,伺服電機維修
本文鏈接：http://m.zt-ic.com/fuwu/Services_Show19673.htm
伺服驅動器維修 伺服電機維修 觸摸屏維修 變頻器維修
聯系方式：
電話：021-50157782
手機：13817011982 微信同號
郵箱：shygdzi@163.com
聯系人：張工
網址：http://m.zt-ic.com
【 我們確保修好測試好給客戶！�。�！】
上一篇：梅州西門子6SL3210-5FB10伺服A07457輸入信號錯誤維修
下一篇：沒有了
